Chevy Traverse Oil Capacity & change (all years)

The Chevy Traverse takes about 6.6 quarts of oil as it runs on a 3.6L V6 engine and can produce up to 310 Horsepower. 

You can surely conclude that a powerful engine should take a heavy toll on oil consumption. However, depending on your driving habits and the adverse weather conditions you drive in, you may need to add more or less oil to your Traverse.

So, want to know more about the overall fuel consumption of your Chevy Traverse? If yes, then binge on till the end of this blog.

Chevy Traverse Oil Capacity & change (all years)

The Oil You Should Use for Chevy Traverse

If you want the best for your ride, there are a few things you need to keep in check. Well, obviously, regular maintenance falls on the checklist, but the kind of oil you pick for your vehicle always plays an upper card!  So, without question, you must pick the best oil.

Moreover, if you’re a Chevy Traverse owner, you are dealing with a powerful engine that needs better care. In that case, you should go with the Full Synthetic Oil.

Now, why’s that? Well, the answer is pretty simple! This oil gives improved performance and striking protection against wear and tear. And believe me, the more powerful the engine, the more risk of wear and tear.

Read also >> Chevy Equinox Oil Capacity – How Much Oil Does Equinox Take?

Recommended Oil For Chevy traverse

As you can assume, Chevrolet suggests using a High Mileage SAE 5W-30 Full Synthetic Motor Oil for the Traverse. Full synthetic oil is, quite simply, the best engine oil you can buy for your powerful Traverse engine.

This is because the more powerful the engine, the higher the chance of building up sludge and getting clogged. Therefore, synthetic oil can prevent that better than conventional oil.

That’s not all; it’s specifically designed to provide unmatched performance, even in the most extreme conditions.

Why exactly is the SAE 5W-30 Full Synthetic Motor Oil Better for the Traverse?

SAE 5W-30 Full synthetic oil is better for Chevy Traverse for various reasons. It provides better protection against wear and tear, helps improve fuel economy, keeps the engine cleaner, and many more.

Let’s know these in detail now:

It Offers Better Protection

Corrosion is one of the biggest enemies of any engine, and synthetic oil does a better job of protecting against it. This is because synthetic oil is designed to flow better at lower temperatures, which means it can protect the engine parts from severe friction. That’s not all; it also helps from sludge build-up.

Improved Fuel Economy

It’s another significant reason to use synthetic oil in your Chevy Traverse. As mentioned above, these oil types are designed to flow at lower temperatures, so your engine won’t have to work hard to pump.

This can lead to a significant reduction in fuel consumption. And there’s no doubt that these engines already take whole loads of oil (nearly 7 quarts). So, improving fuel economy is something you need to put your focus on!

It’s More Durable

Full synthetic oil is more durable than conventional oil, which means it can easily withstand higher temperatures and extreme conditions without breaking down. That’s important because a breakdown in your oil can lead to engine damage which we believe you won’t want to happen!

Better Performance in Cold Weather

Getting your engine roaring is tough in cold weather, isn’t it? You must have faced such challenges once in a while. This is where full synthetic oil resolves the issue for you! Fully synthetic oil is already designed to perform like butter in lower temperatures. That means no matter how chilly the weather outside gets, you’ll always have your engine hot and performing.

Keeps the Engine Cleaner

Finally, synthetic oil also does a fine job of keeping the engine clean. This is because it is designed to resist breakdown and sludge formation. In a nutshell, your engine will stay cleaner for longer, which can help extend its durability.

When Should You Change Your Oil for Chevy Traverse?

It’s no secret that oil changes are essential for the longevity and health of your engine. But with so many different types of oil and tons of opinions out there, it can be tough to know when you should change your oil.

Well, not that tough if you’re a Chevy Traverse user! The Chevy Traverse comes with a maintenance schedule in the owner’s manual that outlines when to change your oil, and it’s based on the model year of your vehicle.

For model years 2009 and newer, Chevy recommends changing your oil every 7,500- 10,000 miles or every six months, whichever may come first (if you use Full Synthetic Oil). However, if you use Conventional Mineral Oil, Chevy recommends changing it every 3,000-5,000 miles.

Of all, these are only general recommendations. So, you might need to replace your oil more often if you drive in severe heat or cold or if you do a lot of stop-and-go driving.

Yet, if you’re in deep waters, the best bet is to consult your Traverse’s owner’s manual or ask your dealer or mechanic. They can help you determine the best schedule for your vehicle.

How to Check Oil Level on Your Traverse?

It’s quite easy with the digital system actually! Just press the arrow on the left side of the control keys that are positioned on your steering wheel. Keep navigating, and you should see “INFO.” After that, hit the ‘up’ arrow key until the “OIL LIFE” option appears on the screen. To see what level you are recently at, press the “SELECT” button. Viola! You can now check your oil level.

How to Change Oil for Chevy Traverse All By Yourself?  (DIY)

If you’re looking to save money, you can surely change the oil in your Chevy Traverse all by yourself. This process is actually pretty simple and only requires a few tools that you probably already have lying in your garage. Here’s a step-by-step guide on how to do it.

Step 1: Gathering Supplies

First, you’ll need to gather a few supplies. You’ll need new oil, an oil filter, a wrench, a funnel, and some rags. Moreover, you’ll also need a jack and jack stand to lift up the vehicle.

Step 2: Draining the Old Oil

Once you have everything, start by jacking up the Traverse and placing it on jack stands. Locate the oil drain plug on the bottom of the engine and place a rag underneath it to catch the old oil. Using the wrench, loosen the drain plug and let all the oil drain out.

Step 3: Replacing the Old Oil Filter

While the oil is draining, locate the oil filter. It’s usually located on the side of the engine. Remove the old filter and replace it with the new one.

Step 4: Refilling the New Oil

After the oil has drained, plug back the drain cap and tighten it. Now it’s time to add new oil. Remove the oil fill cap and use the funnel to pour in the new oil. Now gradually fill the oil level to the full mark on the dipstick.

Step 5: Run the Engine for a Few Minutes

Finally, plug back the oil fill cap and start up the engine. Let it run for a few minutes, then turn it off and check the oil level again. Add more oil if necessary.

That’s it! You’ve successfully changed the oil in your Chevy Traverse.

How to Perform Oil Change 09-17 Chevy Traverse >> Check out the video below:


So, after going through this blog, you should now know Chevy Traverse Oil Capacity & change and how much oil a Chevy Traverse takes. Moreover, you must also know the ins and outs of the types of oil you can pick for your Traverse engine and the most effective ways to get your oil changed all by yourself.

In the end, you must regularly maintain your engine to ensure your Chevy Traverse is in striking shape all the time!

Who Worked on This post?



Anderson is an experienced auto mechanic with over 10 years in the industry. He is skilled in diagnosing and repairing a wide range of vehicles, from sedans to trucks and SUV

Syed Ahmed


Syed Ahmed has been working as an auto mechanic editor for the past five years. He has a background in mechanical engineering and a love for all things automotive

Leave a Comment