What Is P2510 Code On Duramax: How To Fix?

There are many different engine control modules (ECM) out there made by different manufacturers.

Some may have an OBD-II generic code to detect when the ignition relay is open or shorted. P2510 code Duramax is one of these codes.

The code means that the engine control module is not receiving the proper signal from the ignition switch and the relay is not coming on or turning off.

Yet, the problem can cause a lot of problems, including loss of power and even a fire.

P2510 code Duramax

What Does the P2510 Code Mean on Duramax?

The Duramax code P2510 means the engine has a problem with its idle air control system.

In addition, this is a relatively common code and generally means the fuel injectors are not firing correctly. If the problem is not corrected, it can lead to decreased fuel economy and even engine durability problems.

P2510 is an OBD-II generic code for the engine control module which detects whether the ignition relay is open or shorted. The P2510 code can be caused by a variety of issues, such as a broken wire in the ignition system or a malfunctioning ignition switch.

If you’re experiencing this code, it’s important to have your vehicle inspected by a mechanic to determine the cause and correct the problem.

How serious is the P2510 code Duramax?

P2510 code on Duramax is a serious issue. And it needs to be addressed as soon as possible.

  • The code indicates a problem with the engine and should not be ignored. If the code is not fixed, it could lead to serious consequences.
  • If you are experiencing problems with your car not starting, the first thing to check is the ECM signal.
  • Moreover, this code may be an indication about the ignition relay is open or shorted, which can prevent the engine from starting.
  • If you think this may be the case, it’s important to get your car checked by a mechanic as soon as possible.

What are the symptoms of P2510 code on Duramax?

If you’re reading this, then you probably have a Duramax diesel engine and are experiencing one or more of the following symptoms:

  • Rough idle,
  • Poor fuel economy,
  • Misfiring,
  • Loss of power
  • And/or stalling.

P2510 code indicates about the diesel engine in a diesel-powered pickup truck has failed. The most common symptom of this code is a loss of power, especially when accelerating. If the engine is not repaired, it will eventually fail and cause the vehicle to stop working.

The Causing Factors of the Error P2510 code on Duramax

When your Duramax starts making an error code, you may be concerned about what could be causing the issue. Here are some of the most common causes of the P2510 code on a Duramax engine:

  1. Faulty Fuel Injection System
  2. Clogged Catalytic Converter
  3. Damaged or Failed Intercooler
  4. Inoperable Alternator

How Serious Is Code P2510 code on Duramax?

Code P2510 is a serious code. And it indicates a potential problem with the engine. If you experience this code, you should take your vehicle to a mechanic immediately. Plus, this code can indicate a number of issues, including an issue with the engine itself or the emissions control system.

If you see Code P2510 on your car’s diagnostic screen, it means that there is an issue with the ECM signal from the ignition relay.

And, it could mean the engine may not start or shut down properly, which is definitely not a good thing.

When you notice any symptoms that suggest this code is present, it’s important to get it checked out as soon as possible.

How do I fix my Duramax P2510 code?

If you’re experiencing problems with your Duramax P2510 engine, there are a few things you can do to try and fix the code.

  • Check for any obvious mistakes in your maintenance or adjustment schedule.
  • Make sure all spark plugs, air filters, and other components are up to date.
  • Make sure your truck is in good mechanical condition by checking all of the engine’s systems.
  • If everything looks good, check the fuel system for clogs or debris.
  • Repairing the wiring harness to the ignition relay may fix the issue. Moreover, this is a relatively easy repair. And it can be done by a do-it-yourselfer.
  • Chances are your connector pins have corroded or come loose over time. Repairing these pins can fix your code and restore your truck’s performance.
  • If the code remains after following these steps, the next step is to take your engine to a qualified technician for diagnostics.

How Much Does It Cost To Solve the P2510 code?

If you’ve been struggling to decode a P2510 code, it may be time to call in the experts.

According to TheLocal.se, it can cost anywhere from $100-$300 to get the code solved by a specialist. Plus, this price range varies depending on the complexity of the code and the number of calls necessary.

However, if you’re feeling determined and up for a challenge, you can try to solve your own code – but don’t expect it to be easy.

Common mistakes when diagnosing the P2510 code

If you’re experiencing a problem with your Duramax, there’s a good chance that you’ve made one of these common mistakes when diagnosing the P2510 code. Here are five of the most common:

  • Not checking the powertrain code. This is the most common mistake, and it can be easy to overlook if your Duramax isn’t emitting an engine shutdown message or if it’s just running a little rough.
  • Some people don’t properly check the history of the vehicle
  • The major mistake is not knowing what the code means.
  • Another mistake is using a generic code reader, which can often result in incorrect readings.
  • The last mistake is trying to fix the issue without first figuring out what caused it.

P2510 Code related (FAQ)

1. What is code P2510?

This is an OBD2 error code for your Duramax engine faults.

2. What does code P2510 mean?

It means, the OBD2 detects your car’s ignition problem.

3. What causes a PCM to fail?

Solenoid and otherwise actuator circuit overloads are the most common causes of PCM failure.

4. Can I drive with the P2610 code?

If you have a P2610 error code on your car, you may experience the following symptoms: The check engine light is on. The engine’s ride quality may become a concern at some point.

5. How much does a PCM cost?

Replacement of PCM costs, on average, between $885 and $966, according to RepairPal. However, dealership pricing may go upwards of $1,600 for components and labor.

closing thoughts

The P2510 codeDuramax is a problem that can occur in the Duramax engine.

If this code appears, it is important to take the truck to a mechanic to get it fixed. By knowing what this code means and what to do if it appears, drivers can be better prepared for any problems that may arise.

Who Worked on This post?



Anderson is an experienced auto mechanic with over 10 years in the industry. He is skilled in diagnosing and repairing a wide range of vehicles, from sedans to trucks and SUV

Syed Ahmed


Syed Ahmed has been working as an auto mechanic editor for the past five years. He has a background in mechanical engineering and a love for all things automotive

Leave a Comment